Adhesive Machine Operator how-to
How to Run a Peel Test on a Bond
Peel tests prove bonds hold.
Quick answer
Peel tests prove bonds hold. In short: cut; let; clamp, then complete the remaining steps below.
Step by step
Cut a sample.
Let it cure.
Clamp in the tester.
Peel at set speed.
Record force.
Check failure mode.
Safety reminders for adhesive machine operators
- Wear heat PPE
- Ventilate
- Guard nip points
- Lock out for cleaning
Key terms
Hot melt · Glue spread · Open time · Cure time · Delamination · Peel test: see the full adhesive machine operator glossary.